This past winter, because the causes many industries have been affected, though spring is coming, but recently the cold cause temperature is low, the influence of CST together small make up of the peak is then simply added up in operation and use of the feeding mixer winter should and can avoid the problem, the specific look at:
During the winter construction, it should be done in practice: check whether there is ice before starting; Remove the remaining water in the mixing drum and the water supply system after work, close the pump switch, and place the control handle in the "stop" position. At the end of each day, the driver should be responsible for filling the mixing cylinder with fresh water and rotating it at a high speed (14-18 RPM) for 5-10 minutes, and then draining the water away to ensure that the cylinder is clean. When cleaning each part of the mixing drum with high pressure water, please keep away from the instrument and control lever. The distance between the pressure water nozzle and the paint surface of the body shall not be less than 40 cm.
When working, do not extend your hand into the rotating mixing cylinder. Do not extend your hand into the connecting parts of the main discharging chute and the extended discharging chute to avoid accidents. Familiar with structure, working principle and operation method of self-feeding mixer.
Zhongkejufeng mainly produces 0.5 square to 6.5 square from feeding mixer, zl-910 to zl-940 loaders, forklifts, forklifts, etc., if you need the product equipment can contact us through the website or telephone, http://www.pingqxw.com welcome to buy.